Metal fabrication area in the Motton workshop

Home / Manufacturing Capabilities

Manufacturing capability 04

Custom Metal Welding

Joined sheet metal assemblies for cabinets, enclosures, frames and reinforcements, with joint, distortion and finishing requirements reviewed together.

What custom metal welding does

Welding permanently joins prepared metal parts into an assembly.

In sheet metal manufacturing, welding connects panels, frames, brackets and reinforcement where a folded or mechanically fastened construction does not provide the required geometry or joint. The process can produce a complete welded body or local joints within a larger knock-down assembly.

Joint design, material, welding method, fixture and finishing must be considered together. A weld that is technically possible can still be unsuitable if it distorts a visible door or cannot be dressed without weakening the joint.

Its role in metal manufacturing

Welding establishes geometry and load paths between individual formed parts.

Accurate fit-up begins with consistent cutting and bending. Fixtures locate the parts, and a planned weld sequence helps control movement as heat is applied. After joining, welds may be dressed, sealed or prepared for coating according to the drawing.

Welding is only one joining option. Rivets, clinches, screws and bolts may be more suitable for flat-pack products, disassembly or dissimilar materials.

Relevant applications

  • Welded cabinet carcasses and reinforced door frames
  • Equipment enclosures and mounting frames
  • Brackets, gussets and shelf reinforcement
  • Industrial cabinet bases and plinths
  • Guards, supports and sheet metal subassemblies
  • Local joints within bolted or flat-pack constructions

See industrial metal cabinets, custom metal enclosures and custom metal cabinets for product applications.

Important technical considerations

  • Joint type, weld size, length, spacing and visible-face requirement
  • Part fit-up, fixture access and welding sequence
  • Heat input, distortion and correction of large thin panels
  • Weld dressing, corner appearance and coating preparation
  • Sealing requirements at seams, corners and external joints
  • Material compatibility, filler selection and contamination control
  • Inspection method and any functionally critical welded features

Common sheet metal joining methods include spot, MIG/MAG and TIG welding. The appropriate method and its availability are confirmed for the actual material, thickness and joint rather than assumed from a generic capability list.

Materials and surface condition

Mild steel, galvanised steel, stainless steel and aluminium require different preparation and joining controls. Zinc coatings, oil, oxide and contamination affect the operation. Stainless assemblies need attention to heat tint and post-weld surface condition; aluminium requires process confirmation for the specific alloy and thickness.

If a product combines different metals, the joint and the corrosion implications must be reviewed. Mechanical fastening or isolation may be preferable to direct welding.

Welding specification and confirmation

Joint definition Weld symbols, dimensions and locations taken from the approved drawing
Process selection Confirmed by material, thickness, joint, access and finish
Distortion control Fit-up, fixture and sequence planned for the assembly
Visible finish As welded, dressed or otherwise prepared as specified
Weld inspection Visual and dimensional checks; additional testing only when agreed

Any mandatory welding procedure, operator qualification or non-destructive test must be identified at enquiry stage. It is not implied by ordinary fabrication work.

Manufacturing limitations

Thin sheet can distort or burn through, inaccessible joints can restrict welding, and aggressive dressing can reduce effective joint section. A welded assembly may also be uneconomic to ship compared with a knock-down design.

Pressure vessels, certified structural weldments and safety-critical load ratings require specifications and validation beyond a general manufacturing review. No such certification is claimed unless it is explicitly agreed and documented.

Related capabilities

Weld preparation depends on drawing review, cutting and bending. After joining, surfaces move to surface finishing and assemblies to quality control.

Custom metal welding — common questions


Should our product be welded or supplied flat-pack?

That depends on rigidity, sealing, assembly capability, shipping volume and cost. We can compare welded and mechanical construction during drawing review.


Can visible welds be dressed before powder coating?

Yes, where the drawing specifies a dressed cosmetic finish. Access, joint design and acceptable surface appearance must be agreed so the joint is not weakened by excessive dressing.


How do you control distortion in thin panels?

Consistent fit-up, suitable fixtures, controlled heat input and a planned sequence are the main tools. Critical flatness or dimensional requirements should be stated on the drawing.


Do you provide certified welding procedures or NDT reports?

Only when the required procedure, qualification or test is specified and separately agreed. Standard fabrication does not automatically include these documents.


Review a welded assembly

Send the assembly drawing, material, weld requirements and finish. We check fit-up, access, distortion and inspection needs before quoting.