Metal garden shed installed in a garden

Home / Metal Storage Products

Metal storage products

Metal Garden Sheds

Walk-in steel storage for garden tools, bikes and outdoor furniture. Modular panels, flat-pack delivery and a finish you choose.

Product line

Metal garden shed models

11 models are in production for this line. Open a model for sizes, materials and packing, or send us a drawing for a custom version.

Request a quote for this line

What a metal garden shed is used for

A walk-in steel building for the equipment a house does not have room for.

A metal garden shed is a panel-built steel structure with a door you can walk through. It holds what a cabinet cannot: lawnmowers, bicycles, stackable chairs, long-handle tools, bags of compost and seasonal furniture.

We manufacture sheds as modular kits. Panels are formed, coated and packed flat, then assembled on site with hand tools. That keeps freight volume low and lets a single carton line serve several shed sizes.

Typical applications

  • Residential garden tool and mower storage
  • Bicycle and e-bike parking
  • Outdoor furniture and cushion storage
  • Pool and patio equipment
  • Retail garden-centre display buildings
  • Site and facility utility stores

Shed configurations

Panel count, roof type and door position are the three decisions that define a shed range.

  • Pent roof, single slope, single door
  • Apex roof, double doors
  • Lean-to profile for wall placement
  • Double-door front with full-width opening
  • Side door with a fixed window panel
  • Corner and narrow-footprint models for small gardens

Panel and roof details

  • Interlocking wall panels with overlap joints
  • Formed roof panels with a fall to the rear
  • Ridge and eaves trim in matching colour
  • Pre-drilled fixing points and labelled panels
  • Floor frame with anchor points for hard standings
  • Optional window, vent louvre and shelf brackets

Materials and finish

Steel thickness, coating system and fixing quality decide how the shed looks in year five.

Walls and roof are formed from galvanised steel sheet, normally 0.8–1.2 mm. The galvanised layer protects the steel where panels are cut, drilled or scratched. Powder coat in your RAL colour goes over the pre-treated surface and carries the visible finish.

Doors run on a steel frame with hinges specified for outdoor use; handles and fixings can be supplied in stainless steel for coastal markets. Gaskets on the door frame reduce water tracking at the closing line. Roof panels overlap in the direction of the fall so water never runs into a joint.

Finish options

  • Any RAL colour, gloss or matt
  • Two-tone body and roof
  • Woodgrain-textured powder coat
  • Galvanised-only finish for budget ranges
  • Stainless hinges, handles and fixings
  • Printed cartons and assembly instructions in your language

Technical specification

Wall panels Galvanised steel sheet (SGCC), 0.8–1.2 mm, interlocking
Roof Formed steel panels with rear fall, ridge and eaves trim
Coating Polyester powder coat, any RAL colour
Door Single or double, steel frame, outdoor hinges, hasp or cylinder lock
Assembly Flat-pack kit, hand tools, labelled panels
Foundation Level hard standing; floor frame with anchor points
Packing Cartons sized for 20 ft and 40 ft containers
Lead time 30 days after sample approval and deposit

Wind and snow performance depends on the foundation, the anchoring method and the specific model, so it is confirmed per project rather than quoted as a blanket figure. If your market requires documented performance, state the requirement at quotation stage.

Where the shed sits in the range

Cabinet, shed or a hybrid of the two.

Sheds and outdoor metal storage cabinets solve different problems: a cabinet is sized around equipment, a shed is sized around access. Many ranges carry both, so a retailer can offer a lockable box for the pool pump and a walk-in building for the mower.

For full customisation — new panel profiles, engineered structures, private-label programmes — see custom metal manufacturing and OEM & ODM.

Metal garden sheds — common questions


Can I choose my own shed size?

Width, depth and height can all be changed, but each change affects panel count and carton dimensions. Send your target size and we confirm the closest configuration that works without new tooling.


Is a metal shed suitable for a coastal area?

Yes, provided the specification matches the environment. We recommend full powder coat over galvanised steel with stainless fixings, and we confirm the exact build at quotation stage.


How long does assembly take?

A two-person assembly of a standard pent-roof model takes about one to two hours on level ground. Every kit ships with labelled panels and illustrated instructions.


Do you offer private-label sheds?

Yes. Colour, carton printing, manual language, logo placement and accessory sets can all be produced for your brand.


What is the minimum order quantity?

MOQ depends on the model and colour, because a production run is planned around a single coating batch. Send the model and volume you have in mind and we confirm.


Plan your next shed range

Tell us the sizes, the market and the quantity. We come back with a configuration and a landed-cost estimate.