Industrial metal cabinets on a factory floor

Home / Custom Metal Manufacturing

Custom metal manufacturing

Industrial Metal Cabinets

Heavy-duty steel cabinets for plant, workshop and warehouse use — built to the load, the environment and the access pattern.

What makes a cabinet industrial

Load, duty cycle and environment, not the colour.

An industrial cabinet is specified around how hard it will be used. A tool crib opened forty times a shift needs different hinges from a plant-room cabinet opened twice a year. A cabinet in a wet process area needs a different coating from one in a dry warehouse.

We build industrial cabinets from 1.0–2.0 mm steel with reinforced shelves, heavier hinges and bolted or welded frames, then finish to suit the environment.

Typical industrial cabinets

  • Tool cribs and shadow-board cabinets
  • Spare-part and consumable stores
  • PPE and safety equipment cabinets
  • Plant-room equipment housings
  • Waste segregation and bag-holding units
  • Workshop benches with integrated storage

Heavy-duty details

  • Reinforced shelves with folded front edge
  • Double-skin doors on high-cycle units
  • Heavy-gauge hinges with removable pins
  • Three-point locking on wide doors
  • Forklift base or plinth for plant use
  • Replaceable wear strips on drawer runners

Specification by environment

Three environments, three builds.

Dry indoor plant

Cold-rolled steel with powder coat. Standard hinges and cam locks are sufficient where the cabinet is indoors and lightly handled.

Humid or wash-down areas

Galvanised body with full powder coat, stainless hinges and fixings, and drainage or ventilation detailing so water does not stand inside the cabinet.

Corrosive or coastal

Stainless 304 or 316, or galvanised steel with a zinc-rich primer under powder. Fixings, hinges and labels are specified in the same corrosion class as the body.

Safety and identification

  • Lockable chemical and PPE compartments
  • Ventilated gas-bottle storage
  • Labelled bins and shelf markers
  • Engraved asset or department plates
  • Anti-tip wall brackets for tall units
  • Rounded edges on high-traffic corners

Technical specification

Body material Cold-rolled, galvanised or stainless steel, 1.0–2.0 mm
Frame Welded or bolted, reinforced at load points
Shelves Reinforced, adjustable, load stated per design
Doors Single, double or bi-fold, heavy-duty hinges
Locking Cam, espagnolette, three-point or padlockable
Coating Powder coat, zinc-rich primer, or stainless finish
Base Plinth, adjustable feet or forklift base
Lead time Confirmed per project after drawing approval

Where to go next

For sheet metal parts rather than complete cabinets see custom sheet metal fabrication. For equipment housings see custom metal enclosures.

Industrial metal cabinets — common questions


What load can an industrial shelf take?

Load depends on span, panel thickness and shelf design. Send the item weight and shelf span and we specify a shelf that carries it with an appropriate safety margin.


Do you supply cabinets for chemical storage?

We manufacture ventilated and lockable compartments to your specification. The classification of the stored substance and any regulatory requirement remain with you, and the cabinet is built to that requirement.


Can cabinets be moved by forklift?

Yes, a forklift base or reinforced plinth can be included, with lifting points marked.


Are replacement parts available?

Shelves, hinges, locks and feet are produced from the same drawings, so replacements match the original cabinet.


Can you match an existing cabinet on site?

Send dimensions, photographs and a detail of the hinge and lock. We confirm what can be matched and what needs to change.


Specify an industrial cabinet

Send the load, the environment and the access pattern. We propose a construction and quote against it.