
Metal storage products
Patio Storage Cabinets
A dry, lockable place for cushions, covers and outdoor tableware — sized to the patio, not to the shed.
Product line
Patio storage cabinet models
2 models are in production for this line. Open a model for sizes, materials and packing, or send us a drawing for a custom version.
Why patios need their own storage
Cushions and covers wear out from handling, not from use.
Outdoor living areas collect soft goods: seat cushions, parasol covers, table linen, grill tools and lanterns. Carrying them to a shed at the end of every evening is the reason they get left out. A patio cabinet solves that by putting storage where the furniture is.
These cabinets sit against a house wall, at the end of a seating run or under a pergola. Depth is deliberately shallow, height is bench-like, and the top surface doubles as a side table.
Shapes that work on a patio
Low, deep and wide is usually better than tall and narrow.
- Cushion bench with front-opening doors
- Sideboard-height cabinet with adjustable shelves
- Corner unit that follows an L-shaped seating run
- Parasol and pole storage with a tall narrow bay
- Grill-side cabinet with a heat-resistant top
- Bench with backrest and storage underneath
Keeping contents dry
Water arrives from three directions: above, below and through the door line.
Roof panels are formed with a fall to the rear, so water drains behind the cabinet rather than across the doors. The door frame carries an EPDM gasket, and the base is raised on feet so the cabinet does not sit in standing water.
Ventilation matters as much as sealing. Cushions stored in a fully sealed box in a warm climate can develop condensation. Small louvred vents at high and low level allow air movement while keeping rain out.
Weather detailing
- Rear-fall roof panel with drip edge
- EPDM door gasket
- Raised base with adjustable feet
- Louvred or baffled vents
- Stainless hinges and fixings
- Coating carried over all cut edges
Materials, colour and comfort details
Galvanised steel sheet with a polyester powder coat is the standard build. Colour is usually chosen to match the furniture, the window frames or the house trim, so we work from a RAL reference or a physical sample.
Bench tops can be specified with a textured finish to reduce slipping, and corners are radiused on request. Where the cabinet will be used as seating, the top panel thickness and internal bracing are increased.
Options
- RAL colour matched to furniture or trim
- Radiused corners
- Textured non-slip top surface
- Shelf dividers for tableware
- Gas strut on lift-up bench lids
- Removable tray for wet items
Technical specification
| Body material | Galvanised steel sheet (SGCC), 0.8–1.2 mm |
|---|---|
| Coating | Polyester powder coat, any RAL colour |
| Roof | Formed panel with rear fall and drip edge |
| Door seal | EPDM gasket |
| Ventilation | Louvred or baffled vents at high and low level |
| Base | Raised with adjustable feet |
| Assembly | Flat-pack or pre-assembled |
| Lead time | 30 days after sample approval and deposit |
Related storage
For walk-in garden storage see metal garden sheds. For equipment and bin storage against a wall see outdoor metal storage cabinets.
How these products are manufactured
The same approved specification follows the product from flat sheet to packed kit.
Production starts with engineering and drawing review, followed by laser cutting and CNC bending. Surface finishing provides the specified colour and protection, while product assembly covers hardware, accessories and flat-pack kitting.
See the complete manufacturing capabilities overview or our drawing-based quality control process.
Patio storage cabinets — common questions
Will cushions stay dry through a rainy season?
A rear-fall roof, gasketed doors and a raised base deal with most rain. Ventilation prevents condensation, which is often the real cause of damp cushions rather than leaks.
Can the cabinet double as seating?
Yes. Tell us the seating load and span, and the top panel and bracing are specified accordingly.
Can the colour match my furniture?
Send a RAL number or a physical sample. A coating swatch is approved before production.
Does it need to be fixed to the wall?
Free-standing cabinets work on level paving. For tall units or exposed sites we supply wall brackets.
Is assembly required?
Flat-pack models assemble with hand tools in about half an hour. Pre-assembled units ship as complete cabinets.
Build a patio range for your market
Send the sizes, colours and target retail price. We confirm the configuration and quantities that make sense.

