Custom metal enclosure on a production line

Home / Custom Metal Manufacturing

Custom metal manufacturing

Custom Metal Enclosures

Housings for equipment that has to be protected, accessed and maintained. Sized around your components, not around a standard box.

Product line

Utility & equipment enclosure models

5 models are in production for this line. Open a model for sizes, materials and packing, or send us a drawing for a custom version.

Request a quote for this line

What determines an enclosure design

Five questions decide the sheet, the form and the finish.

A custom metal enclosure is a housing built around specific equipment. The design is driven by what goes inside, where it is installed, who opens it and how often — not by a preferred shape.

The five inputs

  • Equipment dimensions, weight and mounting points
  • Installation location: indoor, outdoor, wash-down or corrosive atmosphere
  • Access requirements: hinged door, removable panel, lift-off cover
  • Ventilation or sealing need, and cable or pipe entries
  • Appearance requirement: industrial, architectural or brand-matched

Enclosure types we manufacture

  • Floor-standing equipment cabinets with plinth
  • Wall-mounted control housings
  • Machine-mounted guards and covers
  • Lift-off cover boxes for pumps and valves
  • Back-to-back double-sided access housings
  • Modular enclosures that bolt together on site

Construction choices

  • Welded body for rigidity and sealing
  • Knock-down bolted body for flat shipping
  • Folded and riveted construction for light housings
  • Removable side panels for maintenance access
  • Internal mounting plates and DIN rail supports
  • Reinforced door frames for large openings

Material and finish selection

Match the coating to the environment, not to the price list.

Powder-coated galvanised steel covers most outdoor housings. Stainless steel is specified where wash-down chemicals, salt spray or food contact make coated steel a poor choice. Aluminium is used when weight matters.

Ventilation can be provided by louvred panels, punched slots or a filtered vent set. Where the equipment must stay sealed, the door gasket, cable entry and fixing points are specified together — sealing one without the others does not achieve much.

Finishes

  • Polyester powder coat in any RAL colour
  • Zinc-rich primer under powder for cut-edge protection
  • Brushed or electropolished stainless steel
  • Hot-dip galvanising for heavy structural housings
  • Anti-slip or textured coating for walk-on covers

Access, hardware and identification

  • Hinged doors with removable pin hinges
  • Quarter-turn, cam or espagnolette locking
  • Keyed-alike or master-keyed cylinders
  • Gas struts for heavy lift-up covers
  • Engraved or printed rating plates
  • Labelled cable entries and earth points

Where an enclosure must carry a rating plate, the plate content comes from you. We do not add electrical, ingress or compliance markings that have not been certified for the assembly.

From brief to production

Short feedback loop, no guessing.

Send the equipment dimensions, a sketch or a 3D model. We check access, panel size, bend feasibility and coating route, then produce a drawing for approval. Only after approval does cutting start.

For sheet metal details see custom sheet metal fabrication. For cabinets with shelves and internal fit-out see custom metal cabinets.

Custom metal enclosures — common questions


Can you design the enclosure if I only have the equipment dimensions?

Yes. Send component dimensions, weight, mounting points and service access requirements. We propose a layout and produce a drawing for approval before production.


Do you provide sealed enclosures?

We build gasketed enclosures with specified seals, cable entries and hardware. If you need a certified ingress rating, that certification is your scope — we manufacture to the drawing and the sealing specification you approve.


Which stainless grade should I choose?

Grade 304 covers most general outdoor and food-adjacent use. Grade 316 is specified for salt spray, chloride exposure and aggressive wash-down chemicals.


Can enclosures be supplied as knock-down kits?

Yes, where the design allows bolted construction. Flat shipping reduces freight volume, and assembly instructions are included.


How are large enclosures packed?

Framed crates or heavy cartons depending on size, with protection on coated faces and lifting points marked.


Review your enclosure requirement

Send the equipment dimensions and installation conditions. We reply with a proposed construction and a quotation.