
Home / Manufacturing Capabilities
Manufacturing capability 05
Metal Surface Finishing
Surface preparation and finishing for corrosion protection, appearance and product identification, specified around the material and use environment.
What metal surface finishing does
Finishing prepares the metal surface and applies the specified protective or decorative condition.
A finish can provide corrosion protection, colour, texture, cleanability or a combination of these. The result depends on the substrate, welds, edges, pre-treatment, application and curing — not only on the final colour.
Motton’s standard product finish is polyester powder coat over prepared steel. Other finishes described here are selected and confirmed by material, part geometry, environment and project specification.
Its role in metal manufacturing
Finishing protects the fabrication work and establishes the visible product surface.
Cut edges, welded joints, handled panels and assembled corners all influence coating performance. Surface preparation removes contaminants and creates the required condition for the finish, while masking protects threads, bonding points and interfaces that must remain uncoated.
Approved colour and texture references help align production with the customer’s product range. Finish acceptance should be based on an agreed sample and inspection conditions rather than a screen image.
Relevant applications
- Powder-coated outdoor cabinets, sheds and patio storage
- Coloured equipment enclosures and machine covers
- Industrial cabinets with textured, scuff-resistant finishes
- Branded products matched to a RAL reference or approved sample
- Stainless parts requiring a specified brushed or treated surface
- Masked grounding points, threads, bearing seats and mating faces
Important technical considerations
- Substrate, existing surface condition and weld dressing quality
- Cleaning and pre-treatment appropriate to the material
- Coating access to recesses, corners, hems and enclosed sections
- Drainage, venting and hanging points on assembled parts
- Masking of threads, earth points, labels and functional interfaces
- Colour, gloss, texture and acceptable visual inspection conditions
- Coating thickness and curing requirements where specified
- Packaging protection after finishing
Materials and finish options
| Galvanised or mild steel | Preparation and polyester powder coat; primer system where specified |
|---|---|
| Heavy steel structures | Galvanising or other heavy-duty route reviewed for geometry and access |
| Stainless steel | Brushed, cleaned or otherwise treated finish by agreement |
| Aluminium | Finish route confirmed for the alloy, surface condition and environment |
| Colour reference | RAL reference or physical sample, with an approved swatch for production |
| Functional masking | Defined on the drawing before coating |
Powder coat, zinc-rich primer, wet paint, galvanising and stainless finishing are not interchangeable. Each has different preparation, geometry, repair and inspection requirements.
Manufacturing limitations
Deep recesses and enclosed welded sections can restrict coverage or trap process fluids. Coating can soften sharp visual details but does not properly conceal poor welds, heavy burrs or damaged substrate. Thick films can also affect threads, sliding fits and small assembly clearances.
Salt-spray duration, film-thickness range, adhesion class, colour tolerance or other test criteria must be specified and agreed if they are acceptance requirements. They are not inferred from a generic finish name.
Related products and capabilities
Finishing is central to outdoor metal storage cabinets, metal garden sheds, custom cabinets and custom enclosures.
Before finishing, surface and weld requirements are established during drawing review and welding. Colour and appearance checks form part of quality control.
Metal surface finishing — common questions
Can you match our brand colour?
Send a RAL reference or physical sample. A coating swatch or sample part should be approved under agreed viewing conditions before batch production.
Which finish is suitable for outdoor cabinets?
The environment and substrate determine the system. Galvanised steel with appropriate preparation and polyester powder coat is a common starting point; coastal or corrosive exposure needs a more specific review.
Can threads and electrical grounding points be masked?
Yes. Mark these features on the drawing and define any post-coating requirement so masking and inspection follow the functional design.
Is a corrosion test included with every order?
No. Coating and corrosion tests are performed to an agreed specification when required. A RAL colour or powder-coat description alone does not define a test duration or performance class.
Specify your product finish
Send the material, environment, colour reference and any test criteria. We confirm preparation, masking and inspection requirements before production.