Every importer of outdoor storage eventually asks the same question: should the product ship flat-packed or assembled? The honest answer is that both are correct in different channels, and the decision should be made with a landed-cost calculation rather than a preference.
The container arithmetic
A 40-foot high-cube container holds roughly 67–68 m³ and about 26,000 kg payload, subject to road limits at destination. The constraint is usually volume, not weight, for storage products.
A flat-packed garden shed or cabinet stores as nested panels: the same unit that occupies 0.9 m³ assembled may occupy 0.08–0.12 m³ flat-packed. That eight-to-tenfold difference is why flat-pack dominates long-haul export. A container that carries 150 assembled sheds can carry well over 1,000 flat-packed ones.
| Factor | Flat-pack | Pre-assembled |
|---|---|---|
| Units per 40HQ | High (8–12× more) | Low |
| Freight per unit | Low | High |
| Assembly labour at destination | Required | None |
| Transit damage risk | Lower (dense pack) | Higher (handling large panels) |
| Best channel | E-commerce, retail, distributors | Project, contract, trade counter |
What flat-pack really costs at destination
Flat-pack moves labour from the factory to your market. Whether that is a saving depends on the local labour rate and the assembly time. A two-person team that assembles a shed in 45 minutes at a fully loaded rate of $40 per hour adds roughly $30 per unit — small compared with the freight saved on a dense pack, but significant if your retail price is $300.
Also count the hidden costs: warehouse space for cartons, a returns process for missing fixings, and customer service time for assembly questions. These are manageable, but they are not zero, and they belong in the model.
When pre-assembled wins
Pre-assembled units make sense when:
- The buyer is a project or contractor who will not assemble on site.
- The product is large and the local labour rate is high.
- The customer needs to see and touch the finished item before purchase.
- The destination has cheap regional freight but expensive skilled labour.
In those cases, the extra ocean freight is often smaller than the assembly cost it replaces, particularly for short sea routes.
Packaging is part of the product
Flat-pack only works if the carton survives. Specify edge boards on every corner, a moisture barrier for sea freight, and fixings packed in a labelled bag inside the correct carton. For e-commerce, add a drop-test requirement and a carton that one person can carry up a stairwell. A dense pack that arrives with a crushed corner generates a claim that erases the freight saving.
A simple decision rule
Compare four numbers: freight per unit flat-packed, freight per unit assembled, assembly cost per unit at destination, and the damage/returns cost of each option. If flat-pack freight plus assembly is lower than assembled freight plus damage, ship flat. If the difference is small, choose the option that suits your customer’s buying process, because that is what determines repeat orders.
We quote both options for every programme and include carton dimensions, units per container and assembly time, so the comparison can be made on numbers rather than assumptions.
