Buying garden sheds for resale looks straightforward until the first container arrives. A shed that photographs well can still fail in the market because the door binds after a season, the carton is too heavy for a two-person home delivery, or the assembly manual assumes tools the customer does not own. This checklist covers the decisions that matter before you place a purchase order.
1. Start with the retail price point, not the product
A garden shed programme is built backwards from the shelf price your market will accept. That price determines the steel gauge, the coating system, the packaging and the accessories you can afford. Deciding the product first and forcing the price later is how programmes end up with a shed that is too expensive for its category or too thin for its promise.
Write down three numbers before you talk to a factory: target retail price, target gross margin, and the landed cost you can support. Every specification choice below should be tested against those numbers.
2. Size and internal clearance
Nominal sizes are marketing; internal dimensions are what the customer measures. Confirm:
- External footprint and internal floor area, in both metric and imperial if your market uses both.
- Internal height at the wall and at the ridge — a nominal 6 ft shed often has 1.7 m at the eaves.
- Door opening width and height, measured with the door open at 90 degrees.
- Whether the roof overhangs the door enough to keep rain off the threshold.
Ask for a dimensioned drawing, not a photograph. If the supplier cannot provide one, the specification is not ready for a private-label programme.
3. Steel gauge and frame construction
Panel thickness is usually quoted between 0.6 mm and 1.2 mm. Thinner panels are not automatically bad — a well-braced 0.8 mm panel can outperform a poorly braced 1.0 mm one — but the gauge must match the promise. A shed sold as “heavy duty” should not use 0.6 mm sheet.
Look at how the structure resists racking: corner posts, base rails, roof beams and the number of fasteners per panel. Ask whether the frame is screwed or riveted, and whether the fasteners are stainless or zinc-plated. On a coastal site, that single detail can decide whether the shed is serviceable in year five.
4. Door type and hardware
The door is the part that fails first. Decide between sliding, hinged single, hinged double and roll-up, then check:
- Does the door run on a track that can be cleared of leaves and grit?
- Is there a channel or threshold that traps water?
- Are hinges adjustable, and are they accessible after assembly?
- Is the latch lockable, and does it accept a padlock your market actually stocks?
For retail, a lockable handle is often worth more than an extra 0.1 mm of steel, because it is visible on the shelf and easy to explain.
5. Finish and colour range
Confirm the substrate (hot-dip galvanised, electro-galvanised or zinc-rich primer), the powder film thickness and the colour system. If you plan a colour range, ask for the minimum quantity per colour — powder changeovers cost money, and a four-colour programme may carry a different MOQ from a single-colour one.
Also ask for a physical colour sample or a certified RAL match. Screen colours are not an approval standard.
6. Packaging and home delivery
A shed is a bulky, heavy parcel. Packaging decisions affect damage rates, carrier surcharges and customer reviews:
- Carton dimensions and weight per box, and how many boxes per unit.
- Corner protection and edge boards — the most common transit damage is a crushed corner.
- Whether the carton can be handled by two people or needs a pallet truck.
- Whether fixings and the manual are packed in a labelled bag inside the correct carton.
Ask for a carton drop-test report if the product will move through parcel networks rather than pallet freight.
7. Documentation and compliance
Depending on the market, you may need a declaration of conformity, a technical file, REACH or RoHS statements, FSC paperwork for any timber components, and a manual in the local language. These are not optional extras; they are the difference between a container that clears customs and one that sits in a warehouse.
8. Sample approval before production
Approve a pre-production sample against a written checklist: dimensions, gauge, colour, hardware, packaging and manual. Photograph the approved sample from every angle and keep it as the reference for the QC inspection. Verbal approval is not a specification.
The questions worth asking
If you take one thing from this checklist, make it the dimensioned drawing plus the gauge and finish written into the purchase order. Everything else can be negotiated; those three items decide what the customer actually receives. Our team is happy to review a draft specification before you send it to tender — most programmes improve simply by making the drawing and the finish system explicit.
